PA Active Speakers

HH Electronics TRE-1001 Active Moulded Speaker (HH TENSOR Series)

1,490.24 AED

[TRE-1501] HH Electronics TRE-1501 HH TENSOR - TRE-1501 - Active moulded speaker - 1400W - 15 inch LF driver,1 inch CD - DSP

Out of stock

HH Electronics TRE-1501 HH TENSOR - TRE-1501 - Active moulded speaker - 1400W - 15 inch LF driver,1 inch CD - DSP

1,807.10 AED

HH Electronics TRM-1201 HH TENSOR Active Stage Monitor – 800W, 12″ LF Driver, 1″ Compression Driver

2,042.60 AED

Laney A-SOLO ACOUSTIC INSTRUMENT COMBO - 60W - 8 INCH COAXIAL WOOFER

1,187.05 AED

Laney AH110-G2 ACTIVE MOULDED SPEAKER WITH BLUETOOTH - 400W - 10 INCH LF + 1 INCH CD

830.95 AED

Laney AH112-G2 ACTIVE MOULDED SPEAKER WITH BLUETOOTH - 800W - 15 INCH LF + 1 INCH CD

1,000.84 AED

Laney AH115-G2 2-WAY SPEAKER WITH INTEGRATED MIXER, BLUETOOTH EQUIPPED.

1,067.49 AED

Laney AH2500D PORTABLE PA SYSTEM - 2X500W - 6 CHANNELS BLUETOOTH AND FX - MICS INCLUDED

2,093.31 AED

HH Electronics TENSOR-MINI HH TENSOR - TENSOR MINI - ULTRA COMPACT PA SYSTEM WITH LI-ION BATTERY - TRANSPORT COVER INCLUDED

2,665.16 AED

HH Electronics TRE-1201 HH TENSOR - TRE-1201 - Active moulded speaker - 1400W - 12 inch LF driver + 1 inch CD - DSP

1,613.60 AED

Reverb, Chorus, Compressor, EQ

56-bit DSP with six built-in presets

Crossover, EQ, Dual Band Limiters, Phase and Time Optimisation

Plastic

Robust polypropylene cabinet

Single

-13, +7, +21 dBm; (VR at 5); (0 dBm = 775 mV)

+45 dBu (1 kHz), 390 Vp-p

1,000 mV

2 x Balanced Female XLR/6.3mm Jack Combi Sockets

-3, +7, +21 dBm; (0 dBm = 775 mV)

+8 dBu (Balanced: 600 ohms load, Unbalanced: 50 k ohms)

1 x Balanced Male XLR with ground lift switch (Mix Out)

Yes (Send/Return)

Transformer isolated high-quality effects loop

Transformer-isolated series FX Loop

Yes, transformer-isolated series loop

Yes

Transformer isolated, high quality effects loop

Closed Back

Robust polypropylene cabinet with three handles and 45° monitor angle

Acoustically optimised Plywood cabinet with integrated carry handles

15mm plywood with 18mm MDF baffle

Simple, attractive design with a retractable key cover

Solid wood construction, bass reflex (rear mount)

Robust polypropylene cabinet with three handles and 45° monitor angle

Satin black, sliding key cover, foldable music rest

Bottom: 1x Clamp Mount

Requires mounting to a wall stud for maximum security

35mm pole stand fitting

8mm threaded insert for stand mounting

Adjustable solid steel multi-angle bracket included

Single screw position (centered)

Dual tom holders

Floor tom hooks

Standard size for pickguard/control plate installation

Helps protect against water damage and prevent wood from drying

Protection from dents, scratches, dust, and water; impact protection; neck support

Comprehensive protection and clip free limiting + clip indicator

POWERPAD® padded cushioning, soft microfiber interior

10" woofer & 1" compression driver per enclosure

12" Woofer + 1" Compression Driver

Yes

Global +48V switch

Global Switch (+48V)

800 W

400 Watts maximum output power.

160W Peak, 80W Continuous, 2 x 20W RMS

55W AES, 220W Peak

On-board digital reverb using the "Secret Path" algorithm.

Yes, on-board digital reverb

Digital Spring Reverb

Yes

Yes (studio-quality on-board reverb)

6.3mm jack for external footswitch (controls pre-boost function; footswitch not included)

2 x 1/4" sockets (one for Reverb, one for Boost/Channel)

1 x 1/4" TRS (Remote: Reverb, Chorus)

135 dB SPL, 138 dB SPL (Peak)

113 dB SPL (Peak)

129 dB SPL at 1m

121dB

393 x 415 x 235 mm

49 cm x 31.5 cm x 26.5 cm

448 x 485 x 260 mm

580mm x 580mm x 405mm

245mm x 275mm x 175mm

393mm x 415mm x 235mm (15.5" x 16.3" x 9.3")

450.5mm x 715mm x 360mm

930mm x 500mm x 390mm (approx. 36.6" x 19.7" x 15.4")

107 x 401.5 x 443mm (4.2" x 15.8" x 17.4")

10-inch woofer.

15" woofer

2 x 5-inch HH-designed drivers

4-inch paper cone woofer

8-inch paper cone driver

10-inch HH-designed low-mid driver with glass reinforced cone

12″ Custom HH Low-Frequency Driver

1-inch compression driver.

1" compression driver

1 x 1.33-inch Celestion compression driver with custom waveguide and horn

1.5-inch Neodymium tweeter

1.5-inch neodymium driver

1.33" Compression driver

Integrated, likely Class A/B (some sources suggest 400W nominal/RMS)

2.5 watts

2-way passive line array loudspeaker

2 x 12" Active Subwoofer, Bass Reflex

2-way passive coaxial ceiling speaker

2-way passive, bass reflex

Passive, 2-way, Bass Reflex

Ultra Portable Battery Powered PA Speaker

4-inch LF (Low Frequency) paper cone woofer & 1-inch HF (High Frequency) dome tweeter

6.5" HH-Designed Coaxial Full-Range Driver

2.5 kHz

2.5kHz

Clear Filters