PA

Laney AH112-G2 ACTIVE MOULDED SPEAKER WITH BLUETOOTH - 800W - 15 INCH LF + 1 INCH CD

1,000.84 AED

Laney AH115-G2 2-WAY SPEAKER WITH INTEGRATED MIXER, BLUETOOTH EQUIPPED.

1,067.49 AED

Laney AH2500D PORTABLE PA SYSTEM - 2X500W - 6 CHANNELS BLUETOOTH AND FX - MICS INCLUDED

2,093.31 AED

Laney F67-LIONHEART Portable Bluetooth Speaker – Rechargeable Li-Ion Battery

1,040.96 AED

HH Electronics TENSOR-MINI HH TENSOR - TENSOR MINI - ULTRA COMPACT PA SYSTEM WITH LI-ION BATTERY - TRANSPORT COVER INCLUDED

2,665.16 AED

HH Electronics TRE-1201 HH TENSOR - TRE-1201 - Active moulded speaker - 1400W - 12 inch LF driver + 1 inch CD - DSP

1,613.60 AED

Laney DB200-210 BASS AMPLIFIER COMBO - 200W RMS - 2X10 HH BLUE LABEL WOOFERS PLUS HORN

2,759.06 AED

Ernie Ball P06059 6" FLAT ANGLE / FLAT ANGLE PATCH CABLE 3-PACK - BLACK

71.98 AED

Ernie Ball P06060 25' BRAIDED STRAIGHT / ANGLE INSTRUMENT CABLE - BLACK / BLUE

128.06 AED

Ernie Ball P06062 25' BRAIDED STRAIGHT / ANGLE INSTRUMENT CABLE - BLACK / RED

128.06 AED

Ernie Ball P06066 25' BRAIDED STRAIGHT / ANGLE INSTRUMENT CABLE - BLACK / GREEN

128.06 AED

Ernie Ball P06071 3' STRAIGHT / STRAIGHT SPEAKER CABLE

58.73 AED

Ernie Ball P06081 10' BRAIDED STRAIGHT / ANGLE INSTRUMENT CABLE - BLACK

96.00 AED

Ernie Ball P06082 18' BRAIDED STRAIGHT / ANGLE INSTRUMENT CABLE - BLACK / GREEN

112.11 AED

Ernie Ball P06083 18' BRAIDED STRAIGHT / ANGLE INSTRUMENT CABLE - NEON PINK

112.11 AED

Ernie Ball P06084 18' BRAIDED STRAIGHT / ANGLE INSTRUMENT CABLE - NEON ORANGE

112.11 AED

Ernie Ball P06085 18' BRAIDED STRAIGHT / ANGLE INSTRUMENT CABLE NEON - YELLOW

112.11 AED

Ernie Ball P06220 3" FLAT RIBBON PATCH CABLE 3-PACK

89.59 AED

Ernie Ball P06225 3” SINGLE FLAT RIBBON PATCH CABLE

33.67 AED

Ernie Ball P06390 5FT BRAIDED MALE FEMALE XLR MICROPHONE CABLE BLACK

77.44 AED

1/4"

1/4 inch audio jack

1/4" Right Angle, 1/4" Straight

Gold 1/4" Right Angle, Gold 1/4" Straight

Auxiliary

‎Clamp

Complete 360-degree secure connection

15 Watts

18 watts

20 watts

Reverb, Chorus, Compressor, EQ

56-bit DSP with six built-in presets

Crossover, EQ, Dual Band Limiters, Phase and Time Optimisation

Male-to-Male

Female-to-Female

Male-to-Female

Plastic

Robust polypropylene cabinet

Tuner: Approximately 8 hours (continuous operation, A4 input) Metronome: Approximately 8 hours (continuous operation, tempo = 120, 4 beats, sound)

Approximately 8 hours (tuner continuously operating, A4 input)

Approx. 2 hours (When using the alkaline battery. This figure will vary depending on the actual conditions of use.)

Approximately: 7 hours (Manganese)/16 hours (Alkaline)

20+ hours of playtime

Approximately 6 hours with alkaline or 7 hours with NiMH batteries.

Single

24 (8 Mono / 8 Stereo)

16 (8 Mono / 4 Stereo)

22x 2.4" / 60 mm

18x 2.4" / 60 mm Non-Motorized Fader

17x XLR TRS Balanced Mic Input 8x 1/4" TRS Balanced/Unbalanced Line Input 16x 1/4" TRS Balanced/Unbalanced Stereo Line Input (8 Stereo Pairs)

13x XLR TRS Balanced Mic Input 8x 1/4" TRS Balanced/Unbalanced Line Input 8x 1/4" TRS Balanced/Unbalanced Stereo Line Input (8 Stereo Pairs)

-13, +7, +21 dBm; (VR at 5); (0 dBm = 775 mV)

+45 dBu (1 kHz), 390 Vp-p

1,000 mV

2 x Balanced Female XLR/6.3mm Jack Combi Sockets

-3, +7, +21 dBm; (0 dBm = 775 mV)

+8 dBu (Balanced: 600 ohms load, Unbalanced: 50 k ohms)

1 x Balanced Male XLR with ground lift switch (Mix Out)

Yes (Send/Return)

Transformer isolated high-quality effects loop

Transformer-isolated series FX Loop

Yes, transformer-isolated series loop

Yes

Transformer isolated, high quality effects loop

Closed Back

Robust polypropylene cabinet with three handles and 45° monitor angle

Acoustically optimised Plywood cabinet with integrated carry handles

15mm plywood with 18mm MDF baffle

Simple, attractive design with a retractable key cover

Solid wood construction, bass reflex (rear mount)

Robust polypropylene cabinet with three handles and 45° monitor angle

Satin black, sliding key cover, foldable music rest

Hood and a kangaroo pocket

Device Charger Pass-through, Lumbar Support

FET/Tube Emulation Preamp

10' TS Male 1/4" Cable, Feedback Resistant

Bottom: 1x Clamp Mount

Requires mounting to a wall stud for maximum security

35mm pole stand fitting

8mm threaded insert for stand mounting

Adjustable solid steel multi-angle bracket included

Single screw position (centered)

Dual tom holders

Floor tom hooks

Standard size for pickguard/control plate installation

Helps protect against water damage and prevent wood from drying

Protection from dents, scratches, dust, and water; impact protection; neck support

Comprehensive protection and clip free limiting + clip indicator

POWERPAD® padded cushioning, soft microfiber interior

10" woofer & 1" compression driver per enclosure

12" Woofer + 1" Compression Driver

Yes

Global +48V switch

Global Switch (+48V)

800 W

400 Watts maximum output power.

160W Peak, 80W Continuous, 2 x 20W RMS

55W AES, 220W Peak

On-board digital reverb using the "Secret Path" algorithm.

Yes, on-board digital reverb

Digital Spring Reverb

Yes

Yes (studio-quality on-board reverb)

6.3mm jack for external footswitch (controls pre-boost function; footswitch not included)

2 x 1/4" sockets (one for Reverb, one for Boost/Channel)

1 x 1/4" TRS (Remote: Reverb, Chorus)

500 Watts RMS

400 Watts RMS

160 Watts RMS

600 Watts

55W AES, 220W Peak

98 dB (1 W/1 m)

90 dB SPL

135 dB SPL, 138 dB SPL (Peak)

113 dB SPL (Peak)

129 dB SPL at 1m

121dB

393 x 415 x 235 mm

49 cm x 31.5 cm x 26.5 cm

448 x 485 x 260 mm

580mm x 580mm x 405mm

245mm x 275mm x 175mm

393mm x 415mm x 235mm (15.5" x 16.3" x 9.3")

450.5mm x 715mm x 360mm

930mm x 500mm x 390mm (approx. 36.6" x 19.7" x 15.4")

107 x 401.5 x 443mm (4.2" x 15.8" x 17.4")

10-inch woofer.

15" woofer

2 x 5-inch HH-designed drivers

4-inch paper cone woofer

8-inch paper cone driver

10-inch HH-designed low-mid driver with glass reinforced cone

12″ Custom HH Low-Frequency Driver

1-inch compression driver.

1" compression driver

1 x 1.33-inch Celestion compression driver with custom waveguide and horn

1.5-inch Neodymium tweeter

1.5-inch neodymium driver

1.33" Compression driver

HH Black Label Ceramic Drivers

Full Range Flat Response (FRFR), designed for digital modeling systems

2-way coaxial ceiling speaker

Integrated, likely Class A/B (some sources suggest 400W nominal/RMS)

2.5 watts

24-bit / 44.1 kHz

48 kHz sampling frequency, 24 bits resolution

6x XLR (Channels 1-8)

4 x XLR (CH1-6)

4 x ¼" TRS (Channels 1-4)

2 x ¼" TRS (CH1-2)

4 x ¼" TRS (2 Stereo pairs, Channels 5-8 & 9-12)

3 (2 x stereo ¼" TRS CH3-6; 1 x stereo ¼" TRS CH7-8)

Single-knob on Channels 1-4 (2:1 Ratio, 9dB Makeup Gain)

Single-knob, 2:1 Ratio on Channels 1-2

2-in/2-out, 16-bit/24-bit, 48kHz sample rate

2-in, 2-out, 16-bit/24-bit, 48kHz Sample Rate

Balanced Stereo XLR sockets

Stereo balanced XLR sockets

2-way passive line array loudspeaker

2 x 12" Active Subwoofer, Bass Reflex

2-way passive coaxial ceiling speaker

2-way passive, bass reflex

Passive, 2-way, Bass Reflex

Ultra Portable Battery Powered PA Speaker

16 Ohms

8 Ohm

8 Ohms

123dB SPL (1m)

113 dB SPL

94dB

90 dB SPL

91 dB SPL

NL4 ±1 Twist Lock Connector

Balanced XLR Connector

Push spring connectors

52Hz - 150Hz (DSP tuned)

100Hz - 16kHz

85Hz - 16kHz

80Hz – 16kHz

52Hz - 200Hz

85Hz - 20kHz

75Hz - 20kHz

65Hz – 20kHz

5 x M8 mounting points to the cabinet

Five M8 mounting points (hex bolts included)

3x "dog ear" brackets

45W AES, 180W Peak (at 8Ω)

8 Ohms nominal impedance

30W, 15W, 6W

40W, 20W, 10W

40W, 20W, 10W, 5W

15W, 7.5W, 3W

20W, 10W, 5W

20W, 10W, 5W, 2.5W

111 dB (at 1m)

115 dB SPL

4-inch LF (Low Frequency) paper cone woofer & 1-inch HF (High Frequency) dome tweeter

6.5" HH-Designed Coaxial Full-Range Driver

2.5 kHz

2.5kHz

Clear Filters