PA

Ernie Ball P06392 20FT BRAIDED MALE FEMALE XLR MICROPHONE CABLE BLACK

123.86 AED

[P06393] Ernie Ball P06393 ERNIE BALL 10FT BRAIDED STRAIGHT STRAIGHT INST CABLE PURPLE BLACK

Out of stock

Ernie Ball P06393 ERNIE BALL 10FT BRAIDED STRAIGHT STRAIGHT INST CABLE PURPLE BLACK

96.82 AED

Ernie Ball P06395 ERNIE BALL 18FT BRAIDED STRAIGHT STRAIGHT INST CABLE PURPLE BLACK

127.79 AED

Ernie Ball P06396 ERNIE BALL 18FT BRAIDED STRAIGHT STRAIGHT INST CABLE RED BLACK

127.79 AED

Ernie Ball P06397 ERNIE BALL 25FT BRAIDED STRAIGHT STRAIGHT INST CABLE PURPLE BLACK

154.89 AED

Ernie Ball P06398 ERNIE BALL 25FT BRAIDED STRAIGHT STRAIGHT INST CABLE RED BLACK

154.90 AED

Ernie Ball P06399 ERNIE BALL 15FT PVC STRAIGHT STRAIGHT INST CABLE BLACK

108.42 AED

Ernie Ball P06400 ERNIE BALL 15FT PVC STRAIGHT ANGLE INST CABLE WHITE

108.41 AED

Ernie Ball P06401 3" FLAT RIBBON PATCH CABLE RED 3-PACK

164.40 AED

Ernie Ball P06418 FLEX INSTRUMENT CABLE STRAIGHT/STRAIGHT 20FT - PINK

135.33 AED

Ernie Ball P06422 HEADPHONE EXTENSION CABLE 1/4 TO 3.5MM 10FT - BLACK

152.24 AED

Ernie Ball P06423 HEADPHONE EXTENSION CABLE 1/4 TO 3.5MM 20FT - BLACK

99.58 AED

Ernie Ball P06430 BRAIDED INSTRUMENT CABLE STRAIGHT/STRAIGHT 18FT - EMERALD ARGYLE

112.11 AED

Ernie Ball P06431 BRAIDED INSTRUMENT CABLE STRAIGHT/STRAIGHT 18FT - PURPLE PYTHON

112.11 AED

[P06436] Ernie Ball P06436 FLEX INSTRUMENT CABLE STRAIGHT/STRAIGHT 10FT - GLOW IN DARK

Out of stock

Ernie Ball P06436 FLEX INSTRUMENT CABLE STRAIGHT/STRAIGHT 10FT - GLOW IN DARK

110.00 AED

Ernie Ball P06443 FLEX PATCH CABLE 3IN - BLACK - 3 PACK

135.33 AED

Ernie Ball P06466 FLEX INSTRUMENT CABLE STRAIGHT/ANGLE 20FT - PURPLE

73.75 AED

Ernie Ball P06467 FLEX INSTRUMENT CABLE STRAIGHT/ANGLE 20FT - ORANGE

73.75 AED

Ernie Ball P06048 10' STRAIGHT / STRAIGHT INSTRUMENT CABLE - BLACK

74.74 AED

Ibanez WS1 Guitar Wireless System

689.00 AED

1/4"

1/4 inch audio jack

1/4" Right Angle, 1/4" Straight

Gold 1/4" Right Angle, Gold 1/4" Straight

Auxiliary

‎Clamp

Complete 360-degree secure connection

15 Watts

18 watts

20 watts

Reverb, Chorus, Compressor, EQ

56-bit DSP with six built-in presets

Crossover, EQ, Dual Band Limiters, Phase and Time Optimisation

Male-to-Male

Female-to-Female

Male-to-Female

Plastic

Robust polypropylene cabinet

Tuner: Approximately 8 hours (continuous operation, A4 input) Metronome: Approximately 8 hours (continuous operation, tempo = 120, 4 beats, sound)

Approximately 8 hours (tuner continuously operating, A4 input)

Approx. 2 hours (When using the alkaline battery. This figure will vary depending on the actual conditions of use.)

Approximately: 7 hours (Manganese)/16 hours (Alkaline)

20+ hours of playtime

Approximately 6 hours with alkaline or 7 hours with NiMH batteries.

Single

24 (8 Mono / 8 Stereo)

16 (8 Mono / 4 Stereo)

22x 2.4" / 60 mm

18x 2.4" / 60 mm Non-Motorized Fader

17x XLR TRS Balanced Mic Input 8x 1/4" TRS Balanced/Unbalanced Line Input 16x 1/4" TRS Balanced/Unbalanced Stereo Line Input (8 Stereo Pairs)

13x XLR TRS Balanced Mic Input 8x 1/4" TRS Balanced/Unbalanced Line Input 8x 1/4" TRS Balanced/Unbalanced Stereo Line Input (8 Stereo Pairs)

-13, +7, +21 dBm; (VR at 5); (0 dBm = 775 mV)

+45 dBu (1 kHz), 390 Vp-p

1,000 mV

2 x Balanced Female XLR/6.3mm Jack Combi Sockets

-3, +7, +21 dBm; (0 dBm = 775 mV)

+8 dBu (Balanced: 600 ohms load, Unbalanced: 50 k ohms)

1 x Balanced Male XLR with ground lift switch (Mix Out)

Yes (Send/Return)

Transformer isolated high-quality effects loop

Transformer-isolated series FX Loop

Yes, transformer-isolated series loop

Yes

Transformer isolated, high quality effects loop

Closed Back

Robust polypropylene cabinet with three handles and 45° monitor angle

Acoustically optimised Plywood cabinet with integrated carry handles

15mm plywood with 18mm MDF baffle

Simple, attractive design with a retractable key cover

Solid wood construction, bass reflex (rear mount)

Robust polypropylene cabinet with three handles and 45° monitor angle

Satin black, sliding key cover, foldable music rest

Hood and a kangaroo pocket

Device Charger Pass-through, Lumbar Support

FET/Tube Emulation Preamp

10' TS Male 1/4" Cable, Feedback Resistant

Bottom: 1x Clamp Mount

Requires mounting to a wall stud for maximum security

35mm pole stand fitting

8mm threaded insert for stand mounting

Adjustable solid steel multi-angle bracket included

Single screw position (centered)

Dual tom holders

Floor tom hooks

Standard size for pickguard/control plate installation

Helps protect against water damage and prevent wood from drying

Protection from dents, scratches, dust, and water; impact protection; neck support

Comprehensive protection and clip free limiting + clip indicator

POWERPAD® padded cushioning, soft microfiber interior

10" woofer & 1" compression driver per enclosure

12" Woofer + 1" Compression Driver

Yes

Global +48V switch

Global Switch (+48V)

800 W

400 Watts maximum output power.

160W Peak, 80W Continuous, 2 x 20W RMS

55W AES, 220W Peak

On-board digital reverb using the "Secret Path" algorithm.

Yes, on-board digital reverb

Digital Spring Reverb

Yes

Yes (studio-quality on-board reverb)

6.3mm jack for external footswitch (controls pre-boost function; footswitch not included)

2 x 1/4" sockets (one for Reverb, one for Boost/Channel)

1 x 1/4" TRS (Remote: Reverb, Chorus)

500 Watts RMS

400 Watts RMS

160 Watts RMS

600 Watts

55W AES, 220W Peak

98 dB (1 W/1 m)

90 dB SPL

135 dB SPL, 138 dB SPL (Peak)

113 dB SPL (Peak)

129 dB SPL at 1m

121dB

393 x 415 x 235 mm

49 cm x 31.5 cm x 26.5 cm

448 x 485 x 260 mm

580mm x 580mm x 405mm

245mm x 275mm x 175mm

393mm x 415mm x 235mm (15.5" x 16.3" x 9.3")

450.5mm x 715mm x 360mm

930mm x 500mm x 390mm (approx. 36.6" x 19.7" x 15.4")

107 x 401.5 x 443mm (4.2" x 15.8" x 17.4")

10-inch woofer.

15" woofer

2 x 5-inch HH-designed drivers

4-inch paper cone woofer

8-inch paper cone driver

10-inch HH-designed low-mid driver with glass reinforced cone

12″ Custom HH Low-Frequency Driver

1-inch compression driver.

1" compression driver

1 x 1.33-inch Celestion compression driver with custom waveguide and horn

1.5-inch Neodymium tweeter

1.5-inch neodymium driver

1.33" Compression driver

HH Black Label Ceramic Drivers

Full Range Flat Response (FRFR), designed for digital modeling systems

2-way coaxial ceiling speaker

Integrated, likely Class A/B (some sources suggest 400W nominal/RMS)

2.5 watts

24-bit / 44.1 kHz

48 kHz sampling frequency, 24 bits resolution

6x XLR (Channels 1-8)

4 x XLR (CH1-6)

4 x ¼" TRS (Channels 1-4)

2 x ¼" TRS (CH1-2)

4 x ¼" TRS (2 Stereo pairs, Channels 5-8 & 9-12)

3 (2 x stereo ¼" TRS CH3-6; 1 x stereo ¼" TRS CH7-8)

Single-knob on Channels 1-4 (2:1 Ratio, 9dB Makeup Gain)

Single-knob, 2:1 Ratio on Channels 1-2

2-in/2-out, 16-bit/24-bit, 48kHz sample rate

2-in, 2-out, 16-bit/24-bit, 48kHz Sample Rate

Balanced Stereo XLR sockets

Stereo balanced XLR sockets

2-way passive line array loudspeaker

2 x 12" Active Subwoofer, Bass Reflex

2-way passive coaxial ceiling speaker

2-way passive, bass reflex

Passive, 2-way, Bass Reflex

Ultra Portable Battery Powered PA Speaker

16 Ohms

8 Ohm

8 Ohms

123dB SPL (1m)

113 dB SPL

94dB

90 dB SPL

91 dB SPL

NL4 ±1 Twist Lock Connector

Balanced XLR Connector

Push spring connectors

52Hz - 150Hz (DSP tuned)

100Hz - 16kHz

85Hz - 16kHz

80Hz – 16kHz

52Hz - 200Hz

85Hz - 20kHz

75Hz - 20kHz

65Hz – 20kHz

5 x M8 mounting points to the cabinet

Five M8 mounting points (hex bolts included)

3x "dog ear" brackets

45W AES, 180W Peak (at 8Ω)

8 Ohms nominal impedance

30W, 15W, 6W

40W, 20W, 10W

40W, 20W, 10W, 5W

15W, 7.5W, 3W

20W, 10W, 5W

20W, 10W, 5W, 2.5W

111 dB (at 1m)

115 dB SPL

4-inch LF (Low Frequency) paper cone woofer & 1-inch HF (High Frequency) dome tweeter

6.5" HH-Designed Coaxial Full-Range Driver

2.5 kHz

2.5kHz

Clear Filters